WHY S.E.T. TECHNOLOGY MATTERS
Poor arrow flight is one of the most common issues archers have that affect accuracy; and many don't even realize it. Often, field points will fly fine while broadheads don't. S.E.T. Technology eliminates the frustrations of tuning a bow by allowing the user to micro adjust the limb pivot angle which changes the position of the cams (the lean) as well as the lateral position (centershot) to optimize arrow flight.
In my opinion, S.E.T. is the finest tuning system on the market. It’s easy to use. Anyone can use it. And it works. That’s a winning combination!
P.J. Reilly![]()
Outdoor Life Bow Review
The EnKore includes the S.E.T. Technology that I liked so much on the 2020 Kure. In my opinion, that tuning system is the most intuitive one going for anyone who works on their own equipment at home.
Will Brantley![]()
Editor, Field & Stream Hunting
S.E.T. Technology is as revolutionary to the archery industry as the carbon arrow was back in the 90’s. This technology is a game changer.
Steve Pittman![]()
Elite Retail Partner – Social Circle / ACE Hardware
4 EASY STEPS TO THE PERFECT SHOT
1. OBSERVE THE OUTPUT
2. LOOSEN LOCKDOWN SCREW
3. ROTATE ADJUSTMENT SCREW
4. TIGHTEN LOCKDOWN SCREW
ADJUSTING S.E.T TECHNOLOGY
S.E.T. Technology is adjusted based on the arrow flight you are getting out of your bow and can be determined by paper tuning, bare shaft tuning or broadhead tuning
S.E.T. ADJUSTMENT
From the neutral middle position you can adjust S.E.T. Technology up to 3-degrees in either direction, equivalent to 1.5 revolutions of the mirco-adjust screw.
S.E.T. RANGE
To start, rotate the top and bottom micro-adjust screw equally 1/4-turn. Then, reset centershot on the bow and retest.
S.E.T. TOOLS
The only tool needed is a 5/32" hex key; no bow press or special tools are required. In fact, S.E.T. Technology is the fastest bow tuning technology available today.
CENTERSHOT WITH S.E.T. TECHNOLOGY
Since centershot is adjusted with S.E.T. Technology on select Elite models there is not a single correct measurement to reference. The best approach is to set the arrow rest position by keeping the knocked arrow parallel to the riser and maintain this as S.E.T. Technology is adjusted. The centershot will likely fall between 11/16" and 15/16" depending on the tune of the bow.
